Intel 41210 User Manual
Intel
®
41210 Serial to Parallel PCI Bridge Developer’s Manual
117
Register Description
12.2.63
Offset 13C–14Bh: PCIXHDR_LOG—Uncorrectable
PCI-X Error Transaction Header Log
PCI-X Error Transaction Header Log
This register is the transaction header log for PCI errors. The log in this register corresponds to one
of the status bits set in the PCI-X uncorrectable status register. As soon as an error is logged in this
register, it remains locked for further error logging until the software clears the status bit that
caused the header log (in other words, the error pointer is re-armed to log again).
of the status bits set in the PCI-X uncorrectable status register. As soon as an error is logged in this
register, it remains locked for further error logging until the software clears the status bit that
caused the header log (in other words, the error pointer is re-armed to log again).
12.2.64
Offset 16Ah: ARB_CNTRL—Internal Arbiter Control
Register
Register
Table 97.
Offset 13C–14Bh: PCIXHDR_LOG—Uncorrectable PCI-X Header Log
Bits
Type
Reset
Description
127:64
ROS
0
Address:
These bits capture the 64-bit address of the transaction in which an error was
detected. In case of a 32-bit address, the upper address bits are all 0s. The address is
logged on all error conditions.
logged on all error conditions.
63:44
ROS
0
Reserved
43:40
ROS
0000b
DAC Bus Command:
This field captures the value of C/BE[3:0] during the second address
phase of a DAC transaction.
39:36
ROS
0000b
Bus Command:
This field captures the value of C/BE[3:0] during the first address phase of
the transaction.
35:0
ROS
0
Attribute:
This field carries the attribute of the transaction. The field is arranged as
<CBE[3:0]#:AD[31:0]> during the attribute phase of the transaction. When the bus is in PCI
mode, this register is all 0s.
mode, this register is all 0s.
Table 98.
Offset 16Ah: ARB_CNTRL—Internal Arbiter Control Register
Bits
Type
Reset
Description
15:9
RsvdP
0
Preserved
8
RW
0b
Bus Parking Control:
This bit controls the bus-parking behavior of the internal arbiter:
0 = The bus is parked on the last PCI agent using the bus.
1 = The bus is always parked on the Intel
®
41210 Serial to Parallel PCI Bridge.
7
RW
1b
Bridge Priority Ring Allocation:
This bit indicates the priority ring allocation for the 41210
bridge requests:
0 = The 41210 is in the low-priority ring.
1 = The 41210 is in the high-priority ring.
6:0
RW
7Fh
PCI Master Priority Ring Allocation:
Bit[0] corresponds to REQ#[0], bit[1] corresponds to
REQ#[1], and so on:
0 = The corresponding master is in the low-priority ring of the internal arbiter.
1 = The corresponding master is in the high-priority ring of the internal arbiter.