Honeywell 800-05056 User Manual
Map Editor
98
Link Setting
1.
Click
(Link) on the toolbar and place it on the screen linked with a sub-map.
2.
The Link Map
box appears. Select the individual link boxes by using the
Ctrl key on the keyboard, and then adjust the size and position of the link box
using a mouse, a keyboard or the icons shown below.
using a mouse, a keyboard or the icons shown below.
Interval adjustment: Equalizes the distance between three or more
selected boxes.
selected boxes.
Size adjustment: Equalizes the size of two or more selected boxes.
Clicking the arrow keys while holding the Shift key on the keyboard
changes the size of the selected boxes.
Clicking the arrow keys while holding the Shift key on the keyboard
changes the size of the selected boxes.
Position adjustment: Arranges two or more selected boxes towards one
direction or towards the center. Clicking the arrow keys while holding the
Ctrl key on a keyboard changes the position of selected boxes.
direction or towards the center. Clicking the arrow keys while holding the
Ctrl key on a keyboard changes the position of selected boxes.
Cut, Copy, Paste: Cuts, copies or pastes the link box.
3.
Go to the Property [Link] tab and set the properties of the selected link box.
Figure C-13
Property [Link] Tab
4.
Click
(Save) on the toolbar to save the map.
Table C-2
Property Tab Device Information
Property
Description
Name
Enter a name for the link box.
Image
Double-click the field and select an image to insert in the link box.
Link Document
Double-click the field and select a map to be linked with the link box.
Ratio
Adjust the image size within the link box.
X Coordinates / Y
Coordinates
Coordinates
Adjust the position of the link box on the screen by clicking each field
and changing the numbers.
and changing the numbers.
Horizontal / Vertical Adjust the link box size by clicking each field and changing the
numbers.
Text Show
Select Yes to display the name of the link box on the selected image.