Hitachi cdr-7930 User Manual
11
Symptoms
Possible causes
Remedy
The CD-ROM
Drive does not
operate even when
a disc is loaded.
Drive does not
operate even when
a disc is loaded.
1.You place the disc up-side
down in the Disc Tray.
2. The disc is dirty.
3. The pick-up lens is
3. The pick-up lens is
dirty.
4.The disc is scratched or
warped.
5.Cable connection is
incorrect.
1.Place the disc right side up in the
Disc Tray, then load it.
2.Clean the disc surface.
(See page 4)
3.Clean up the pick-up lens.
(See page
10)
4.Change the disc.
5.Turn off your SYSTEM and re-
connect cables correctly.
The Disc Tray can
not beopened.
not beopened.
The program is incorrect. It
is locked by the program.
is locked by the program.
Check the program. Check the
program.
program.
Communications
between the host
computer and the
devices on the
interface cable can
not be done.
between the host
computer and the
devices on the
interface cable can
not be done.
There are devices with the
same Device Configuration
jumper setting on the
interface cable.
same Device Configuration
jumper setting on the
interface cable.
Give each device a different Device
Configuration Jumper setting.
Configuration Jumper setting.
(A)
(A)
5
47.5
Å}
0.5
79.3
Å}
0.5
(A)
(A)
190
12-M3
(Depth
(A)
(A)(A)
(A)
139.8Å}0.5
146
10Å}0.5
21.8Å}0.5
21.8Å}0.5
41.3
(32.5)
42.7
130.0
149
: Max. 5)
(A : Hole)
Surface of
the CD-ROM DRIVE
the CD-ROM DRIVE
Mounting frame of
the host computer
the host computer
(A) Hole
5 (max)
Mounting Screw
M3X0.5
MECHANICAL DIMENSIONS
Dimensions (unit : mm)
149.3
139.8+/- 0.5
10+/- 0.5
21.8+/- 0.5