GE 8041 User Manual

50

1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of 

the handset. 

. Snap the ends of the belt clip into place.

Each handset can be used with an optional headset for hands free operation.

1. Connect the headset to the headset jack on the side of the handset. The 

handset receiver and microphone are disabled when the headset is connected.

. Adjust the headset to rest comfortably on top of your head and over your ear. Move 

the microphone to approximately two to three inches from your mouth.

3. Press the TALK/CALL BACK button to answer a call or make calls using the headset.
4. To return to normal operation, unplug the headset from the jack.

1. Make sure the telephone is 

OFF (not in TALK mode) before you replace the battery.

. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the battery pack 

from the handset.

4. Insert the new battery pack and connect the cord to the jack inside the battery 

compartment.

5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge.