Honeywell i9050 User Manual

5

HE360 POWERED FLOW-THROUGH HUMIDIFIER

69-1117

A regular maintenance program prolongs the
life of your humidifier and provides a more
comfortable home. Frequency of cleaning will
depend on the condition of your water.

The humidifier can use hard or soft water.
Hard water will leave mineral deposits that
are more difficult to clean, but the frequency
of cleanings will be less than with soft water.
Soft water deposits are easier to remove,
but the humidifier needs to be cleaned more
often when using soft water.

Use the following steps to clean your
Honeywell humidifier:

Serious Personal Injury Hazard.
Can cause electrical shock and
injury from moving parts.
Disconnect power and shut off water
supply before removing cover.

Never oil any part of the humidifier.

1. Disconnect the power and turn off the

humidifier water supply.

2. Remove the humidifier cover by

unplugging the connector and
loosening thumb screw. Grasp the
cover near the bottom and pull toward
you.

3. Remove the humidifier pad assembly

from the humidifier by grasping the
top of the tray and pulling it towards
you.

4. Lift the tray off the pad.
5. Gently pinch the water nozzle catches

inwards until you can lift the water
nozzle off the tray.

6. Carefully remove any mineral deposits

from the tray.

7. Disconnect the drain hose from the

drain fitting on the bottom of the
humidifier housing.

8. Clean the drain fitting, if necessary.
9. Bend the drain hose to loosen any

mineral deposits.

10. Flush the drain hose with pressurized

water (a running tap) to clean the hose.

11. Reattach the drain hose to the

drain fitting.

12. Snap the water nozzle back on the tray.
13. Be sure the black mark on the end of

the pad is facing up. Place the tray on
the new pad.

M12683

COVER

HUMIDIFIER 
PAD ASSEMBLY

HUMIDIFIER  HOUSING

WATER FEED TUBE

THUMB SCREW