Siemens gigaset c475 ip User Manual

Web configurator – configuring the telephone via a PC
Querying the phone status

Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 18.12.07

Ve

rs

ion 2.

1, 

08.0

1.20

07

Please note: If the date and time are updated by a time server that automatically 

switches between summer time and standard time, you must always activate 

 here. 

¤

Click 

 to save the settings in your phone. 

Once you have activated synchronisation, the time and date will be compared with a time 

server as soon as an Internet connection is established. 
Synchronisation will usually occur once a day (at night) if synchronisation is activated. Any 

additional synchronisation will take place only after each new system start of the base sta-

tion (e.g. after a firmware update or a power cut). 
If you register a new handset on your base station it will assume the time and date of the 

base station without any additional synchronisation with the time server. 

Date and time settings are transferred to every handset after synchronisation. 

General information about your phone is displayed. 

¤

In the menu list, click the 

 tab. 

The following information is displayed:

The phone's current IP address within the local network. For assigning the IP address, 

The phone's device address. 

Version of the firmware currently downloaded. You can download updates of the 

firmware on your phone (page 117). Firmware updates are available on the Internet. 

Version of your phone's EEPROM storage chip (page 192). 

– The default time server "europe.pool.ntp.org" will remain stored in the base station even if you 

overwrite it. If you delete your time server from the 

 field and synchronisation is still 

activated, the base station will return to synchronisation with the default time server. However, it 

will no longer appear in the

 field. 

– The base station will return to synchronisation with the default time server if you have entered 

your own time server in the 

field and the base station is unable to synchronise time 

and date for ten consecutive attempts. 

– If you have deactivated synchronisation with a time server, and if the date and time are not set on 

any handset, then the base station will attempt to reference date and time settings from the CLIP 

information of an incoming call.