Siemens MC35 User Manual
AT Command Set
MC35_ATC_01_V05.00
Page 100 of 256
15.07.2002
4.27 AT+CMUT Mute control
Test command
AT+CMUT=?
Response
+CMUT: (list of supported <n>s)
OK
OK
Read command
AT+CMUT?
Response
+CMUT: <n>
OK/ERROR/+CME ERROR
OK/ERROR/+CME ERROR
Write command
AT+CMUT=<n>
Response
OK/ERROR/+CME ERROR
Parameter
<n>:
0 mute off
1
mute
on
Reference
GSM 07.07
Note
This command can be used in all audio modes (1 to 6) and during a voice
call only. See AT^SNFS in Chapter 8.26 for more details on the various
audio modes.
Users should be aware that when they switch back and forth between dif-
ferent audio modes the value of <mute> does not change. This means
that the status of mute operaton is retained until explicitly changed.
As alternative, you can use the AT^SNFM command described in Chap-
ter 8.22.
call only. See AT^SNFS in Chapter 8.26 for more details on the various
audio modes.
Users should be aware that when they switch back and forth between dif-
ferent audio modes the value of <mute> does not change. This means
that the status of mute operaton is retained until explicitly changed.
As alternative, you can use the AT^SNFM command described in Chap-
ter 8.22.