Nokia 6020b Service Manual
Issue 1 03/2005
COMPANY CONFIDENTIAL
41
Copyright © 2005 Nokia. All Rights Reserved.
RM-31
7 - System Module
7 - System Module
Nokia Customer Care
■
System connector (X2002)
There are also some marks introduced (bars) in order to help placing the system connector and
checking placement after rework. The placement bars need to be visible (they can be partly
hidden by the connector), but the connector must equally hide them in order to be parallel to
the PWB. In addition, the connectors must meet their pads properly as well.
checking placement after rework. The placement bars need to be visible (they can be partly
hidden by the connector), but the connector must equally hide them in order to be parallel to
the PWB. In addition, the connectors must meet their pads properly as well.
■
UEM (D2200)
There are also corner marks introduced in order to help checking placement after rework.