Canon mf3220, mf3228, mf3240 Service Manual

3-44

F-3-281

2) Remove the power supply shield plate [1].

- 9 screws [2]

F-3-282

1) Remove the fixing cover [1].

- 2 screws [2]

F-3-283

2) Remove the fixing entrance guide [1] by sliding it to the left and right.

- 2 screws [2]

F-3-284

3) Disengage the connector [1] of the power supply board.

4) Remove the grounding springs and the pressure springs [2] on both sides.

5) Remove the pressure plates [3] on both sides.

F-3-285

6) While holding the left and right frames [2] of the Fixing film unit [1], lift

it up at an angle and remove it.

F-3-286

1) Remove the gear [1] by disengaging the claw.

2) Take out the boss of the bushing [2], turn it, and remove the bushing.

F-3-287

3) Hold the shorter shaft [2] of the Fixing pressure roller [1] and lift it up at

an angle to remove it from the bushing.  Remove the Fixing pressure

roller by sliding it.

F-3-288

[1]

[1]

[1]

[1]

[2]

[1]

[1]

[2]

[1]

[2]

[2]

[3]

[1]

[2]

[1]

[2]

[2]

[1]