HP 6710b Service Manual

Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and

disconnect the keyboard cable (2) from the system board.

Remove the keyboard.

Reverse this procedure to install the keyboard.

2048-MB, PC2-5300, 1-DIMM, memory module

417506-001

1024-MB, PC2-5300, 1-DIMM, memory module

414046-001

512-MB, PC2-5300, 1-DIMM, memory module

414045-001

Before removing the internal memory module, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the memory/WLAN module compartment cover (see 

Release the keyboard (see 

).

Remove the internal memory module:

Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.

(The edge of the module opposite the slot rises away from the computer.)

66 Chapter 4   Removal and replacement procedures

ENWW