Samsung DB22D Quick Setup Guide
Quick Setup Guide
Panduan Penataan Singkat
Hướng dẫn cài đặt nhanh
English
The warranty will be void in the event of a breakdown due to exceeding the maximum
The warranty will be void in the event of a breakdown due to exceeding the maximum
recommended hours of use per day of 16 hours.
The colour and the appearance may differ depending on the product, and the specifications are
The colour and the appearance may differ depending on the product, and the specifications are
subject to change without prior notice to improve the performance.
Bahasa Indonesia
Garansi akan hangus jika terjadi kerusakan akibat melampaui waktu maksimal yang disarankan
Garansi akan hangus jika terjadi kerusakan akibat melampaui waktu maksimal yang disarankan
untuk digunakan, yaitu, 16 jam setiap hari.
Warna dan tampilan mungkin berbeda, tergantung produk.
Spesifikasi dapat berubah tanpa pemberitahuan untuk meningkatkan performa.
Warna dan tampilan mungkin berbeda, tergantung produk.
Spesifikasi dapat berubah tanpa pemberitahuan untuk meningkatkan performa.
Tiếng Việt
Bảo hành sẽ bị hủy trong trường hợp hư hỏng do vượt quá số giờ sử dụng tối đa hàng
ngày được khuyến nghị (16 giờ).
Màu sắc và hình dáng có thể khác nhau tùy theo sản phẩm và để cải tiến hoạt động, các
Màu sắc và hình dáng có thể khác nhau tùy theo sản phẩm và để cải tiến hoạt động, các
thông số kỹ thuật có thể sẽ được thay đổi mà không cần thông báo trước.
DB22D
BN68-06212G-00
Components
Komponen
Các thành phần
1
2
3
4
+
+
-
-
5
6
7
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Troubleshooting
Pemecahan masalah
Khắc phục sự cô
English
Issues
Solutions
The screen keeps switching on
and off.
Check the cable connection between the product
and PC, and ensure the connection is secure.
No Signal is displayed on the
screen.
Check that the product is connected correctly with
a cable.
Check that the device connected to the product is
Check that the device connected to the product is
powered on.
Not Optimum Mode is displayed.
This message is displayed when a signal from the
graphics card exceeds the product’s maximum
resolution and frequency. Refer to the Standard
Signal Mode Table and set the maximum
resolution and frequency according to the product
specifications.
The images on the screen look
distorted.
Check the cable connection to the product.
The screen is not clear. The
screen is blurry.
Adjust Coarse and Fine. Remove any accessories
(video extension cable, etc) and try again.
Set the resolution and frequency to the
Set the resolution and frequency to the
recommended level.
The screen appears unstable
and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu and
the Standard Signal Mode Table.
There are shadows or ghost
images left on the screen.
The screen is too bright. The
screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space settings.
White does not really look
white.
Go to Picture and adjust the White Balance settings.
There is no sound.
Check the connection of the audio cable or adjust
the volume. Check the volume.
The volume is too low.
Adjust the volume. If the volume is still low
after turning it up to the maximum level, adjust
the volume on your PC sound card or software
programme.
The remote control does not
work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat. Check for power
Check if the batteries are flat. Check for power
failure. Make sure that the power cord is connected.
Check for any special lighting or neon signs
Check for any special lighting or neon signs
switched on in the vicinity.
Bahasa Indonesia
Masalah
Solusi
Layar hidup dan mati terus
menerus.
Periksa sambungan kabel antara produk dan PC,
serta pastikan kabel tersambung dengan kencang.
No Signal ditampilkan pada
layar.
Pastikan produk telah tersambung dengan benar
menggunakan kabel.
Pastikan perangkat yang tersambung ke produk
Pastikan perangkat yang tersambung ke produk
telah dihidupkan.
Not Optimum Mode
ditampilkan.
Pesan ini ditampilkan bila sinyal dari kartu grafis
melampaui resolusi dan frekuensi maksimum
produk. Lihat Tabel Mode Sinyal Standar dan
tetapkan resolusi serta frekuensi maksimum
menurut spesifikasi produk.
Gambar di layar tampak
terdistorsi.
Periksa sambungan kabel ke produk.
Layar tidak jelas. Layar buram.
Sesuaikan pengaturan Coarse dan Fine. Lepaskan
setiap aksesori (kabel ekstensi video, dsb.), lalu coba
lagi.
Atur resolusi dan frekuensi ke tingkat yang
Atur resolusi dan frekuensi ke tingkat yang
disarankan.
Layar tampak tidak stabil dan
goyang.
Pastikan resolusi dan frekuensi PC serta kartu grafis
ditetapkan dalam kisaran yang kompatibel dengan
produk. Setelah itu, ubah pengaturan layar jika
perlu dengan melihat Informasi Tambahan dalam
menu produk dan Tabel Mode Sinyal Standar.
Terdapat bayangan yang
tersisa di layar.
Layar terlalu cerah. Layar
terlalu gelap.
Sesuaikan pengaturan Brightness dan Contrast.
Warna layar tidak konsisten.
Buka Picture dan sesuaikan pengaturan Colour Space.
Warna putih tidak tampak putih. Buka Picture dan sesuaikan pengaturan White Balance.
Tidak ada suara.
Periksa koneksi kabel audio atau atur volume.
Periksa volume suara.
Volume suara terlalu kecil.
Mengatur volume suara. Jika volume suara masih
kecil setelah diperbesar ke tingkat maksimum,
atur volume suara di kartu suara PC atau program
perangkat lunak.
Remote control tidak
berfungsi.
Pastikan baterai telah dimasukkan dengan benar (+/-).
Periksa apakah daya baterai habis. Periksa
Periksa apakah daya baterai habis. Periksa
kegagalan daya. Pastikan kabel daya telah
tersambung.
Periksa apakah ada cahaya khusus atau tanda neon
Periksa apakah ada cahaya khusus atau tanda neon
yang menyala di sekitarnya.
Tiếng Việt
Các vấn đê
Giải pháp
Màn hình liên tục bật và tắt.
Kiểm tra kết nối cáp giữa sản phẩm và PC, và
đảm bảo kết nối chắc chắn.
No Signal được hiển thị trên
màn hình.
Kiểm tra xem sản phẩm có kết nối đúng với cáp
chưa.
Kiểm tra xem thiết bị kết nối với với sản phẩm có
bật không.
Not Optimum Mode được
hiển thị.
Thông báo được hiển thị khi một tín hiệu từ card
màn hình vượt quá độ phân giải và tần số tối đa.
Tham khảo Bảng chế độ tín hiệu tiêu chuẩn và
cài đặt độ phân giải và tần số tối đa theo thông
số sản phẩm.
Hình ảnh trên màn hình bị
biến dạng.
Kiểm tra kết nối cáp với sản phẩm
Màn hình không rõ. Màn hình
bị mờ.
Điều chỉnh
Coarse và Fine. Gỡ bỏ bất kỳ thiết bị
(cáp video nối dài v.v) và thử lại.
Cài đặt độ phân giải và tần số tới mức khuyến
cáo.
Màn hình không ổn định và
rung.
Kiểm tra xem độ phân giải và tần số của máy
tính và card đồ họa có được cài đặt ở mức
tương thích với sản phẩm hay không. Sau đó,
thay đổi cài đặt màn hình nếu được yêu cầu
bằng cách tham khảo Thông tin bổ sung về
trình đơn sản phẩm và Bảng chế độ tín hiệu tiêu
chuẩn.
Có bóng hoặc hình ảnh mờ
còn lại trên màn hình.
Màn hình quá sáng. Màn
hình quá tối.
Điều chỉnh
Brightness và Contrast.
Màu màn hình không đồng
nhất.
Đi tới
Picture và điều chỉnh cài đặt
Colour Space.
Màu trắng trông không hẳn là
trắng.
Đi tới
Picture và điều chỉnh cài đặt
White Balance.
Không có âm thanh.
Kiểm tra kết nối của cáp âm thanh hoặc điều
chỉnh âm lượng. Kiểm tra âm lượng.
Âm lượng quá nhỏ.
Điều chỉnh âm lượng. Nếu âm lượng vẫn nhỏ
sau khi bật âm lượng đến mức tối đa, hãy điều
chỉnh âm lượng trên card âm thanh của máy tính
hoặc chương trình phần mềm.
Điều khiển từ xa không hoạt
động.
Đảm bảo rằng pin được đặt đúng chỗ (+/-). Kiểm
tra xem pin đã hết hay không.
Kiểm tra liệu không có điện. Đảm bảo rằng dây
nguồn được kết nối. Kiểm tra xem có bóng đèn
đặc biệt hay ánh đèn neon gần đó hay không.
Reverse Side
Sisi Belakang
Mặt sau
English
Bahasa Indonesia
Tiếng Việt
1
Quick setup guide
1
Panduan Penataan Singkat
1
Hướng dẫn cài đặt nhanh
2
Warranty card
(Not available in some
locations)
2
Kartu Garansi
(Tidak tersedia di beberapa
lokasi)
2
Thẻ bảo hành
(Không có ở một số khu
vực)
3
Power cord
3
Kabel daya
3
Dây điện nguồn
4
Batteries
(Not available in some
locations)
4
Baterai
(Tidak tersedia di beberapa
lokasi)
4
Pin
(Không có ở một số khu
vực)
5
Remote Control
5
Remote Control
5
Điều khiển từ xa
6
D-SUB cable
6
Kabel D-SUB
6
Cáp D-SUB
7
RS232C-Stereo cable
7
Kabel stereo RS232C
7
Cáp stereo RS232C
RGB IN
RJ45
RS232C IN
USB
HDMI IN(DVI)
AUDIO IN
USB
1
2
3
4
5
6
7
English
1
Connect to a USB memory device.
2
Connects to MDC using an RS232C-Stereo cable.
3
Connects to a source device using an HDMI cable.
4
Connects to a source device using a D-SUB cable.
5
Connects to MDC using a LAN cable.
6
Receives sound from a PC via an audio cable.
7
Connects to the power cord.
Bahasa Indonesia
1
Menghubungkan ke perangkat USB.
2
Terhubung ke MDC dengan kabel stereo RS232C.
3
Terhubung ke perangkat sumber lewat kabel HDMI.
4
Terhubung ke perangkat sumber lewat kabel D-SUB.
5
Terhubung ke MDC dengan kabel LAN.
6
Menerima suara dari PC via kabel audio.
7
Menyambung ke kabel daya.
Control Panel
Panel Kontrol
Pa-nen điều khiển
Tiếng Việt
1
Kết nối với thiết bị nhớ USB.
2
Kết nối với MDC bằng cáp stereo RS232C.
3
Kết nối với thiết bị nguồn bằng cáp HDMI.
4
Kết nối với thiết bị nguồn bằng cáp D-SUB.
5
Kết nối với MDC bằng cáp LAN.
6
Nhận âm thanh từ PC qua cáp âm thanh.
7
Kết nối với dây nguồn.
English
1
Selects the input source that an external device is
connected to.
2
Use this button for turning the Display on and off.
3
Press a button on the remote control pointing at the
sensor on the front of the product to perform the
corresponding function.
- Using other display devices in the same space as the
remote control of this product can cause the other
display devices to be inadvertently controlled.
Bahasa Indonesia
1
Memilih sumber input yang terhubung pada
perangkat eksternal.
2
Gunakan tombol ini untuk menyalakan atau
mematikan Monitor.
3
Tekan tombol pada remote control yang menunjuk
sensor pada bagian depan produk ini untuk
melakukan fungsi terkait.
- Menggunakan perangkat tampilan lain di ruang
yang sama dengan remote control produk
ini dapat mengakibatkan perangkat tampilan lain
terkontrol tanpa disengaja.
SOURCE
3
2
1
Tiếng Việt
1
Chọn nguồn vào kết nối với thiết bị ngoại vi.
2
Sử dụng nút này để bật và tắt Màn hình.
3
Nhấn nút trên điều khiển từ xa trỏ vào cảm biến
trên mặt trước của sản phẩm để thực hiện chức
năng tương ứng.
- Sử dụng các thiết bị màn hình khác trong cùng
một không gian như điều khiển từ xa của sản
phẩm này có thể làm cho thiết bị màn hình vô
tình bị điều khiển.
[DBD22-QSG-ASIA]BN68-06212G-00.indd 1
2014-06-20 4:38:34