Intel SC5250-E User Manual
Intel® Entry Server Chassis SC5250-E
System Interconnection
Revision 1.02
Intel order number C32881-001
39
8. System
Interconnection
8.1 Signal
Definitions
The pin-out on the connectors referred to in this section are defined in the respective server
board Technical Product Specification (TPS).
board Technical Product Specification (TPS).
8.2 Chassis Internal Cables
The following cables are provided as part of the chassis kit:
8.2.1
Front Panel cable
A 34-conductor ribbon cable with 34-pin IDC* connectors links the front panel and SSI EEB
Revision 3.0-compliant server board.
Revision 3.0-compliant server board.
8.2.2 USB
cable
A 4-conductor USB cable with 10-pin connector for the server board and 4-pin external USB
connector is used for connecting the front mounted USB connector to the server board
connector is used for connecting the front mounted USB connector to the server board
8.2.3 Fan
Connectors
The installed system fans provide 3-pin connectors designed to mate with SSI (ATX*)-
compatible fan headers.
compatible fan headers.
8.3 Server Board Internal Cables
Depending on the specific server board support of these features, some or all of the following
cables may not be included as part of the boxed board kit:
cables may not be included as part of the boxed board kit:
•
IDE Cable: One or two 40-pin, 80-conductor DMA33/66/100 IDE cable.
•
SCSI Cable: One 68-pin, 68-conductor twisted-pair wide SCSI cable with terminator.
Cable supports connection of up to four SCSI drives to the server board.
Cable supports connection of up to four SCSI drives to the server board.
•
Floppy Cable: One 34-conductor cable featuring two 34-pin IDC connectors (2x17)
floppy cable.
floppy cable.
•
Serial Cable: One 8-conductor cable terminated in a 2x5 header at one end and a 9-pin
panel mount Dsub connector on the other.
panel mount Dsub connector on the other.