Zanussi ZKC44500XA User Manual
For Duration
first you set the minutes and
then the hours, for End
first you set the
hours and then the minutes.
An acoustic signal sounds for 2 minutes after
the time ends.
the time ends.
or
symbol and time
setting flash in the display. The oven stops.
3. Turn the knob for the oven functions to the
off position.
4. Press any button or open the oven door to
stop the acoustic signal.
If you press when you set the
hours for DURATION
hours for DURATION
, the
appliance goes to setting of the
END
END
function.
Setting the MINUTE MINDER
1. Press again and again until and "00"
flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the minutes
and then the hours.
At first, the time is calculated in minutes and
seconds. When the time you set is longer
than 60 minutes, the symbol
than 60 minutes, the symbol
comes on
in the display.
The appliance now calculates the time in hours
and minutes.
3. The MINUTE MINDER starts automatically
after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic signal
sounds for two minutes. "00:00" and
flash in the display. Press any button or
open the oven door to stop the acoustic
signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
function operates, the symbol
comes on in the display.
Count Up Timer
Use the Count Up Timer to monitor how long
the oven operates. It is on immediately when the
oven starts to heat.
To reset the Count Up Timer, press and hold
and . The timer starts to count up again.
and . The timer starts to count up again.
The Count Up Timer cannot be used
with the functions: Duration
with the functions: Duration
,
End
.
Using the accessories
WARNING!
Refer to Safety chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the
Push the shelf between the guide bars of the
shelf support and make sure that the feet point
down.
Baking tray:
Push the baking tray between the guide bars of
the shelf support.
Wire shelf and baking tray together:
Push the baking tray between the guide bars of
Push the baking tray between the guide bars of
the shelf support and the wire shelf on the
guide bars above.
www.zanussi.com
13