Xerox Phaser 6020 User Guide

Page of 130
Installation and Setup 
 
38 Xerox
®
 Phaser
®
 6020 Color Printer 
 User 
Guide 
 
Configuring Network Settings 
This section includes: 
 
About TCP/IP and IP Addresses ..................................................................................................................................... 38 
 
Assigning the IP Address of the Printer ...................................................................................................................... 38 
 
About TCP/IP and IP Addresses 
Computers and printers use TCP/IP protocols to communicate over a network. Macintosh computers use 
either TCP/IP or the Bonjour protocol to communicate with a network printer. For Macintosh OS X 
systems, TCP/IP is preferred. 
With TCP/IP protocols, each printer and computer must have a unique IP address. Many networks as well 
as cable and DSL routers have a DHCP server. A DHCP server assigns an IP address to every computer 
and printer on the network that is configured to use DHCP, automatically. 
If you are connected to the Internet using cable or DSL, check with your carrier for information on IP 
addressing. 
 
Assigning the IP Address of the Printer 
By default, the printer receives an IP address from a DHCP server over a TCP/IP network. Network 
addresses assigned by DHCP are temporary. Once the addresses expire, the network can assign a new 
one. 
To assign a static IP address for your printer, you can use the wireless connection method on the installer 
disk. Once an IP address is assigned, you can change it using CentreWare Internet Services or the Printer 
Setting Utility. 
Notes:
 
 
You can view the IP address of your printer on the Configuration Page. 
 
To enable continued use of the printer even if the IP Address assigned by the DHCP server 
changes, you can use the installer or CentreWare Internet Services.