Canon PowerShot SX540 HS Manual

40

 

●

Changing the composition of the shot may reduce the 
effectiveness of image stabilization or the subject may not be 
displayed around the center of the screen with [

] displayed in 

gray. If this occurs, repeat steps 1 – 2.

 

●

If you start shooting a movie, image stabilization may cause the 
shot to be recomposed.

 

●

Depending on shooting conditions and subjects, images may not 
look as expected.

 

●

Instead of pressing the shutter button in step 2, you can press [ ] 
to choose the subject. The camera beeps and [ ] is displayed 
when the subject is detected.

 

●

If you press the [

] button, no IS mode icon is shown.

 

●

To fine-tune the size of subjects gradually, move the zoom lever 
while [ ] is displayed.

 

●

If you do not want to display the detected subject around the 
center of the screen, choose MENU (= 29) > [

] tab > 

[

 Centering] > [Off]. Image stabilization optimal for shooting at 

the telephoto end is activated.

You can prevent the subject from being lost by reducing camera shake 

when zoomed at the telephoto end and correcting the selected subject so 

it is displayed around the center of the screen.

 

●

Zoom to the telephoto end, and then 

press the [ ] button.

 

●

[ ] is displayed, and image stabilization 

optimal for shooting at the telephoto end 

is applied.

 

●

[ ] is displayed in the center of the 

screen.

 

●

Aim the camera so that [ ] is on the 

desired subject, and then press the 

shutter button halfway.

 

●

The camera continues to track the 

subject so that the subject is displayed 

around the center of the screen.

 

●

Press the shutter button all the way 

down.