Canon PowerShot SX540 HS Manual
124
Before Use
Basic Guide
Advanced Guide
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
4
Establish a connection with an
access point.
●
Connect to the access point as described
5
Enter your e-mail address.
●
Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an e-mail
address.
●
Enter your e-mail address, press the
[ ][ ] buttons to choose [Next], and
then press the [ ] button.
6
Enter a four-digit number.
●
Enter any four-digit number, press the
[ ][ ] buttons to choose [Next], and
then press the [ ] button.
●
You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
7
Confirm the e-mail notification was sent.
●
When information is sent from CANON
iMAGE GATEWAY, an e-mail notification
is sent to the e-mail address you entered
in step 5.
●
The screen notifying you that the e-mail
notification was sent is displayed. Press
the [ ] button.
●
The [
] icon changes to [
].
Registering CANON iMAGE GATEWAY
To link the camera and CANON iMAGE GATEWAY, add CANON iMAGE
GATEWAY as a destination Web service on the camera. By setting
this, an e-mail notification for Camera Web Link Settings will be sent,
so you must use the e-mail address that you use on your computer or
smartphone.
1
Access the Wi-Fi menu.
●
Press the [ ] button.
●
After the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
2
Choose [
].
●
Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
3
Consent to entering your e-mail
address.
●
Read the displayed content, press the
[ ][ ] buttons to choose [I Agree], and
then press the [ ] button.