KitchenAid 27" Combination Wall Oven with Even-Heat™ True Convection (lower oven) Installation Instruction
5
3. At a 45° angle, align the door hinges with the slots in the lower
front of the oven cavity. Slowly insert the door, making sure
you maintain the 45° angle. You will know the door is engaged
in the slot when you feel a slight drop.
you maintain the 45° angle. You will know the door is engaged
in the slot when you feel a slight drop.
4. Lower the oven door to the fully open position. If the oven
door does not open to a full 90°, repeat steps 1 through 3.
5. Locate the oven door hinge locks in the corners of the oven
door, and rotate the hinge locks toward the oven cavity to the
locked position.
See Step 3 (illustration A) in the “Remove Oven Door” section
for the proper locked position.
locked position.
See Step 3 (illustration A) in the “Remove Oven Door” section
for the proper locked position.
6. Close the oven door.
7. When the hinges are properly installed and the door is closed,
7. When the hinges are properly installed and the door is closed,
there should be an even gap between the door and the
control panel. If one side of the oven door is lower than the
other, the hinge on that side is not properly installed.
control panel. If one side of the oven door is lower than the
other, the hinge on that side is not properly installed.
Repeat the steps to remove and replace the oven door. See
“Remove Oven Door” and “Replace Oven Door.”
“Remove Oven Door” and “Replace Oven Door.”
Positioning Oven Feet
The oven feet need to be installed to allow a microwave/oven
combination to be installed in a recommended cutout height of
42
combination to be installed in a recommended cutout height of
42
¹⁄₂" (107.9 cm).
NOTE: Do not remove the spacers.
1. Using 2 or more people, place the oven on its back on a
covered surface.
A. Spacers
A