KitchenAid 1000-Watt Convection Microwave with High-Speed Cooking - 30" Use & Care Manual
Electrical Requirements
Observe all governing codes and ordinances.
Required:
■
A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a
fuse or circuit breaker.
fuse or circuit breaker.
Recommended:
■
A time-delay fuse or time-delay circuit breaker.
■
A separate circuit serving only this microwave oven.
Settings
Clock
The Clock is a 12-hour (12:00-11:59) or 24-hour (0:00-23:59) clock.
Touch SETUP/CLOCK to reach Clock submenu, and follow the
prompts to set the Clock. Clock format (12 hours with AM and PM or
24 hours) may also be set in the Clock submenu.
Touch SETUP/CLOCK to reach Clock submenu, and follow the
prompts to set the Clock. Clock format (12 hours with AM and PM or
24 hours) may also be set in the Clock submenu.
Timer
With the microwave oven in standby mode, touch the Timer control,
enter time, then touch the Timer control or the Start control. Cook
functions may be entered while the Timer is counting down. To cancel
timer, touch Timer control while the Timer countdown is active in the
display.
enter time, then touch the Timer control or the Start control. Cook
functions may be entered while the Timer is counting down. To cancel
timer, touch Timer control while the Timer countdown is active in the
display.
Control Lock
Activate to avoid unintended start. Touch and hold the Cancel control
for about 3 seconds until 2 tones sound and padlock icon appears in
the display. Repeat to unlock control.
for about 3 seconds until 2 tones sound and padlock icon appears in
the display. Repeat to unlock control.
Setup/Clock
Ten options/settings may be adjusted: 1-Set Clock; 2-Scrolling Speed;
3-Sound; 4-Filter Reset; 5-Fan Timer; 6-Light Timer; 7-Language
(English or French); 8-Calibrate Temp; 9-Demo Mode; 10-Factory
Reset.
3-Sound; 4-Filter Reset; 5-Fan Timer; 6-Light Timer; 7-Language
(English or French); 8-Calibrate Temp; 9-Demo Mode; 10-Factory
Reset.
Scroll Speed
Scroll speed of the text may be adjusted. Touch the SETUP/CLOCK to
reach the Scrolling Speed submenu, and follow the prompts to set
speed.
reach the Scrolling Speed submenu, and follow the prompts to set
speed.
Sound (Tones)
Programming tones and signals. Key beep tones may be turned off, or
all tones (including end-of-function signals) may be turned off. Touch
SETUP/CLOCK to reach the Sound submenu, and follow the prompts
to turn off or on the programming tones or all tones.
all tones (including end-of-function signals) may be turned off. Touch
SETUP/CLOCK to reach the Sound submenu, and follow the prompts
to turn off or on the programming tones or all tones.
Filter Reset
Reset the filter status after replacing and/or cleaning the filters. Touch
SETUP/CLOCK to reach the Filter Reset submenu, and activate reset.
SETUP/CLOCK to reach the Filter Reset submenu, and activate reset.
Vent Fan
Various speeds, ranging from high to low, and off. Comes on
automatically as cooling fan during any cook function.
automatically as cooling fan during any cook function.
Fan Timer: Set vent fan to run for exactly 30 minutes, or to run for only
30 minutes more (off after 30 minutes). The vent fan may be turned off
at any time using the Vent Fan control. Touch SETUP/CLOCK to reach
the Fan Timer submenu, and select the setting.
30 minutes more (off after 30 minutes). The vent fan may be turned off
at any time using the Vent Fan control. Touch SETUP/CLOCK to reach
the Fan Timer submenu, and select the setting.
Light Timer
Set the cooktop light to turn on and off at certain times. Touch SETUP/
CLOCK to reach the Light Timer submenu, and follow the prompts to
set the light on time and light off time in hours and minutes, or to
cancel Light Timer.
CLOCK to reach the Light Timer submenu, and follow the prompts to
set the light on time and light off time in hours and minutes, or to
cancel Light Timer.
NOTE: Light Timer uses 12-hour clock only.
Language (on some models)
Language of the display text may be changed. Touch the SETUP/
CLOCK to reach the Language submenu, and follow the prompts to
set language to English or French.
CLOCK to reach the Language submenu, and follow the prompts to
set language to English or French.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
fire, or electrical shock.
WARNING
GROUNDING INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING:
Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.
This device complies with Part 18 of the FCC Rules.
OPERATING YOUR MICROWAVE OVEN