Sony vgn-fs660p Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 1. 

Disconnect the power cord and remove the battery. Failure to 

do so can result in damage to the Notebook or personal injury. 

To prevent cosmetic 

damage or scratches , please  place your PC upside down on top of a soft surface. 

Step 2. Using the enclosed magnetic 
screwdriver, remove the indicated 
screw and set aside. 

 

Step  3. Remove the hard disk drive 
access door in the direction of the 
arrow and set  aside. 

 

 

 

Step 4. 

Be careful

 

not to 

drop screws into the

 

unit. 

  Remove the 

four (4) screws as indicated in the picture. 

 

 

 

These easy instructions are intended to guide you through the replaceme nt process. 
 

 

ü 

To avoid electric shock, please make sure product is turned off and AC Adaptor is disconnected from the 

power source . Remove jewelry before you begin work to avoid scratching the surface of your notebook 
computer.* 

ü 

Place your notebook computer on a clean, stable and covered surface to avoid damage to the 
computer’s case.* 

ü 

Follow the ESD (Electrostatic Discharge) damage prevention instructions: 

o

 

Hold parts by the edges, away from exposed circuitry when possible. 

o

 

Do not walk around excessively as this promotes static build-up. 

ü 

The appearance of the electronic components shown in the illustrations may be different from the 
components shipped. This slight difference does not affect the accuracy of these instructions.   

 

* Sony is not responsible for any loss of data associated with your computer or any damage caused by incorrect handling 
of the computer under these procedures. The terms of your Sony limited warranty continue to apply. 

  Do not pull up on 

plastic tab, it can result in damage to 
the notebook.