LG LDE3017ST Owner's Manual
10
LOCATIONS OF SURFACE ELEMENTS AND CONTROLS
The radiant surface elements are located on the cooktop as below. The radiant control pad locations are correlative
to Radiant surface elements on the cooktop as shown below.
S U R FAC E C O N T RO L S C O O K I N G
LOCKOUT
LEFT REAR ELEMENT INDICATOR
(Single element)
WARMING ZONE ELEMENT INDICATOR
RIGHT REAR ELEMENT INDICATOR
(Single element)
LEFT FRONT ELEMENT INDICATOR
(Double element)
RIGHT FRONT ELEMENT INDICATOR
(Double element)
SELECT INDICATOR
• Use to select single or double elements.
• For LEFT FRONT & RIGHT FRONT ELEMENTS.
HS(Hot Surface) MESSAGE
• Activated when the unit is hot to the touch after it is
turned off.
• Activated during Self Clean Cycle.
• Activated even after the unit is turned off.
• Displayed until the unit has cooled down to
approximately 150˚F/66˚C.
PF(Power Failure) MESSAGE
The PF message will appear whenever there has
been a power interruption to the appliance. To clear
the PF message press ON/OFF control pad to reset
and be sure to reset the clock with the correct time of
day.