LG LDE5415ST Owner's Manual

OPERATION

The cooking areas on your range are identified by 

permanent circles on the glass cooktop surface. 

For the most efficient cooking, fit the pan size to the 

element size.
Pans should not extend more than 

beyond the cooking area.
When a control is turned on, a glow can be seen 

through the glass cooktop surface. 

SINGLE

DUAL

TRIPLE

WARM

ZONE

SINGLE

SINGLE

SINGLE

WARM

ZONE

SINGLE

DUAL

For Model : LDE5415

For Model : LDE5411

It is normal to see a very faint red ring around the 

outer edge of a dual or triple element when using 

it as a single element at a high heat setting. This 

is only a reflection from the bright glow of the 

center element and is not a malfunction.

The hot surface indicator light glows as long as any 

surface cooking area is too hot to touch.
It remains on after the element is turned off and until 

the surface has cooled to approximately 150 °F.

It is normal for the surface elements to cycle on 

and off during cooking, even on higher settings. 

This will happen more frequently if cooking on a 

lower temperature setting.

 

•

Only use cookware and dishes that are safe for 

oven and cooktop use.

 

•

Always use oven mitts when removing food 

from the cooktop and oven.

 

•

Do not place sealed containers on the cooktop.

 

•

Do not use plastic wrap to cover food while on 

the cooktop. Plastic may melt onto the surface 

and be very difficult to remove.

 

•

 

•

The surface element may appear to have 

cooled after it has been turned off. The element 

may still be hot and touching the element before 

it has cooled sufficiently can cause burns.

Push the 

Single element knob in.

Turn the knob in either direction to the desired 

setting. 

The control knob clicks when it is positioned at 

both 

Off and Hi.

Off

On

Single

 

•

Hi is the highest temperature available.

 

•

Lo is the lowest temperature available.