LG CM2540DAB Owner's Manual
Operating
20
Oper
ating
2
Radio Operations
Listening to the radio
1. Press FUNCTION on the remote control or F on
the unit. until FM/DAB in the display window.
The last received station is tuned in.
The last received station is tuned in.
2. [FM]
Auto tuning : Press and hold TUN.(-/+) on the
remote control or Y/U on the unit for
remote control or Y/U on the unit for
about 2 seconds until the existing frequency
starts changing, then hands off. Scanning stops
when the unit tunes in a station.
starts changing, then hands off. Scanning stops
when the unit tunes in a station.
Manual tuning : Press TUN.(-/+) on the remote
control or Y/U on the unit repeatedly.
control or Y/U on the unit repeatedly.
[DAB]
Press TUNING -/+ and press d/M when
scanning stop.
3. Adjust the volume by pressing p/o.
Presetting the Radio Stations
You can preset 50 stations for FM/DAB. Before
tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or F on
tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or F on
the unit. FM/DAB in the display window.
The last received station is tuned in.
The last received station is tuned in.
2. [FM]
Select the desired frequency by pressing
TUN.(-/+) on the remote control or Y/U
on the unit.
[DAB]
Press TUNING -/+ and press d/M when
scanning stop.
3. Press PROGRAM/MEMORY. A preset number
will blink in the display window.
4. Press PRESET.FOLDER W/S to select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
7. To listen a preset station, press
PRESET.FOLDER W/S.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds. “CLEAR” will blink on the display
window.
window.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press d/M on the remote control. This will change
the tuner from stereo to mono. Then the reception
will be better than before.
will be better than before.
Be sure to fully extend the FM wire antenna.
,
Note
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press SET/RDS
repeatedly to cycle through the various data types. :
System) facility. This shows information about the
radio station being listened to. Press SET/RDS
repeatedly to cycle through the various data types. :
PS
(Programme Service Name)
The name of the channel will appear in
the display
The name of the channel will appear in
the display
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
The programme type (e.g. Jazz or News)
will appear in the display.
RT
(Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time as broadcast by the
station.
This shows the time as broadcast by the
station.
You can search the radio stations by programme
type by pressing SET/RDS. The display will show
the last PTY in use. Press PTY on the remote
control one or more times to select your preferred
programme type. Press and hold TUN.(-/+) on the
remote control or Y/U on the unit. The tuner
type by pressing SET/RDS. The display will show
the last PTY in use. Press PTY on the remote
control one or more times to select your preferred
programme type. Press and hold TUN.(-/+) on the
remote control or Y/U on the unit. The tuner
will search automatically. When a station is found,
the search will stop.
the search will stop.