LG BS275 Owner's Manual

16

English

1.    Press the “POWER” to turn off the projector lamp, you will 

see a message as below on the on-screen display.

 
2.   

Press the “POWER” again to confirm. 

3.   The cooling fan continues to operate for about 120 seconds 

for cooling cycle and the POWER LED will flash green. 

When the light stop flashing and turn amber, the projector 

has entered standby mode.

   If you wish to turn the projector back on, you must wait 

until the projector has completed the cooling cycle and has 

entered standby mode. Once in standby mode, simply press 

“POWER” to restart the projector.

4.   Disconnect the power cable from the electrical outlet and the 

projector.

5.   Do not turn on the projector immediately following a power 

off procedure.