3M cp45 User Guide
4
1
Power on the Camcorder Projector.
2
Press the
Menu button ( ), and then press the Left/Right ( / ) arrows to
navigate to
Setting Screen ( ).
3
Press the
Up/Down ( / ) arrows to navigate to the Language item, and then
Press the
OK button to confirm.
4
Use the
Up/Down ( / ) arrows to select a language.
5
Press the
OK button to confirm the setting.
Set Language
Power ON - Slide power switch to the “
ON” position.
Power OFF - Slide power switch to the “
OFF” position.
Inserting a Memory Card (optional)
1
Open the Micro SD card cover.
2
Gently insert the card as indicated (
contacts facing
upward) until the card reaches the end of the slot.
3
When the card is fully inserted, the icon (
) will
appear on screen.
Note: The Micro SD card is spring loaded. To remove
Note: The Micro SD card is spring loaded. To remove
the card, gently push inward to release the card and
then slide it outward to remove it from the Camcorder
Projector.
4
Replace the Micro SD card cover.
5
CP45 can only recognize one drive at a time when connecting to PC. If you like
the PC to recognize internal memory drive, you will have to remove microSD card
from device.
Power Camcorder Projector ON/OFF
© 3M 2011. All Rights Reserved.
3M™ Camcorder Projector CP45