GE jbp24ekbb Specification Guide

30

25

2-1/2

7-1/2

29-7/8

25-3/8*

47-5/8

44-7/16

2-1/2

Acceptable electrical

outlet area

Preferred electrical

outlet area

Roughed-in dimensions

*Dimension from wall to front of closed door handle is 27-3/4”.

Listed by
Underwriters
Laboratories

All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation 
of the range.

For answers to your Monogram,

®

GE Profile Performance Series,

™

GE Profile

™

or GE appliance questions, call 

GE Answer Center

®

service, 800.626.2000.

A properly grounded branch circuit with a 3 prong grounding type receptacle is required for 
GE ranges.

Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals are not 
accessible after range installation. See shaded area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below 
countertops. To reduce possibility of scorching of walls, engineering recommends a minimum of 
1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.

Installation Information: Before installing, consult installation instructions packed with product
for current dimensional data.

11.7

8.8