Schneider Electric EM4000 User Manual
930-134-01-A.00
PowerLogic
TM
Series EM4000
11/2013
Installation Guide
©2013 Schneider Electric All Rights Reserved
31
Regulatory Compliance
The PowerLogic EM4000 meter must be installed by a qualified electrician with
knowledge of local installation regulations. Initial installation of the unit, and any
subsequent modification to the unit, must be inspected by the local electrical
inspection authority.
knowledge of local installation regulations. Initial installation of the unit, and any
subsequent modification to the unit, must be inspected by the local electrical
inspection authority.
The PowerLogic EM4000 meter complies with the standards listed in Table 3.
Table 3: Regulatory Compliance
Equipment servicing and access
The information in this section must be considered as a mandatory requirement,
and must be strictly adhered to when installing and operating PowerLogic EM4033
and EM4080 meters.
and must be strictly adhered to when installing and operating PowerLogic EM4033
and EM4080 meters.
Access to equipment
The equipment must be accessible to authorized personnel only. Equipment must
be installed in areas where access can be restricted.
be installed in areas where access can be restricted.
Servicing the equipment
No preventive maintenance is required on any of the equipment. Visually inspect
the equipment yearly and ensure it is free of dust or other particles. If necessary,
wipe with a clean cloth.
the equipment yearly and ensure it is free of dust or other particles. If necessary,
wipe with a clean cloth.
Component servicing
Individual components are not user-serviceable, and must be returned to Schneider
Electric for repair. If an equipment fault occurs, do not attempt to repair the faulty
component.
Electric for repair. If an equipment fault occurs, do not attempt to repair the faulty
component.
All maintenance activities should be performed by qualified personnel only. Do not
perform any operating or maintenance procedures that are not described in the
product documentation provided by Schneider Electric.
perform any operating or maintenance procedures that are not described in the
product documentation provided by Schneider Electric.
Graphical symbols
Table 4 shows the graphical symbols that appear on the equipment.
Discipline
Regulatory and industry standard
Standards
UL certified to IEC/EA/UL/CSA 61010-1 2
nd
Edition
CSA-C22.2 No. 61010-1-04
Emissions (EMC)
FCC Part 15 Class B, ICES-003 EN55022, IEC 6100-4-5
Surge power/telephone lines
ANSI/TIA968-A: 2002