Manualsbrain.com
  1. Manuals
  2. Brands
  3. GE
  4. C2S980SEMSS
  5. Leaflet

GE C2S980SEMSS Leaflet

Download
Page of 2
For answers to your Monogram,
® 
GE Profile
™
 or  
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
Specification Revised 12/07
221218
You must use the rear filler strip kit shipped with  
the range or the optional accessory backguard  
when installing these ranges
Note: Cabinets installed adjacent to slide-in  
ranges must have an adhesion spec of at least  
194° temperature rating.
Optional Kits for Slide-In Gas Ranges: 
(Available at additional cost)
Installation Information: Before installing, consult  
installation instructions packed with product for  
current dimensional data.
All GE ranges are equipped with 
an Anti-Tip device. The installation 
of this device is an important, 
required step in the installation  
of the range.
Dimensions and Installation Information (in inches) 
C2S980SEMSS 
GE Café Free-Standing Dual-Fuel Range
 
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
28-1/4*
36
Maintain 
at least 6" 
from nearest 
combustible 
surface.
Acceptable
Electrical
Outlet Area
30" Slide-In Range 
Dimensions (in inches)
45-1/8
2-1/4
5
6
4-1/2
30
30" Min.
15" Min.
6
30" Slide-in Elec. Range 
Aug. 8, 2003 -km
23-3/16
30
30
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
*Wall to front of 
 closed door handle 
on model JSP34.
 28" on models 
 JSP26/JSS26/16.
Note: Range may be placed with 0" clearance (flush) at the back wall and side walls 
below countertop if the range side trims above the countertop extend beyond the cabinet 
fronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearest 
combustible surface.    
30
31-1/2
Counter Cutout Dimensions (in inches) 
30"
37-1/4"
26-1/4"*
46-3/8"
36-1/4"
+
_
1/4
Product is shipped with 4-prong 
plug. Recommended outlet is 
a NEMA 14-50R receptacle.
7-1/2
8
9
4
30
3
3
3
2-1/4
 
2
NOTE: Make
*Dimensions from wall
  to front of closed door 
  handle is 29"
 gas connections on 
the left side and electrical conections 
on the right side of the
cutout opening.
Recommended acceptable 
electrical outlet area. Orient
the electrical receptacle so the
length is parallel to the floor.
Wall-Mounted
Recommended area 
for through-the-wall 
connection of pipe 
stub/shut-off valve.
Recommended area for
through-the-floor connection
of pipe stub/shut-off valve.
This area allows 
flush installation 
to rear wall.
30"
37-1/4"
26-1/4"*
46-3/8"
36-1/4"
+
_
1/4
Product is shipped with 4-prong 
plug. Recommended outlet is 
a NEMA 14-50R receptacle.
7-1/2
8
9
4
30
3
3
3
2-1/4
 
2
NOTE: Make
*Dimensions from wall
  to front of closed door 
  handle is 29"
 gas connections on 
the left side and electrical conections 
on the right side of the
cutout opening.
Recommended acceptable 
electrical outlet area. Orient
the electrical receptacle so the
length is parallel to the floor.
Wall-Mounted
Recommended area 
for through-the-wall 
connection of pipe 
stub/shut-off valve.
Recommended area for
through-the-floor connection
of pipe stub/shut-off valve.
This area allows 
flush installation 
to rear wall.