Liebherr 131113 7085462 - 01 User Manual

-

the freezer temperature is above 0 °C.

The  following  displays  indicate  malfunction.  Possible  causes

and corrective action (see Malfunction).

-

F0

 to 

F9

-

FE

*

-

The power failure symbol 

shines.

u

To  switch  on  the  entire  appliance  it  is  necessary  only  to

switch on the freezer compartment.

Switch  on  the  appliance  approx.  2  hours  before

adding frozen food for the first time.
Do  not  load  food  to  be  frozen  before  the  tempera-

ture display reads -18 °C.

u

Open the door.

u

Press On/Off button, freezer compartment

 Fig. 2 (8)

.

w

The  temperature  display  of  the  refrigerator  compartment

indicates the current temperature inside.

w

The temperature display of the freezer compartment and the

alarm symbol flash until the temperature is sufficiently low. If

the temperature is above 0 °C, dashes flash. If it is below,

the current temperature flashes.

If the refrigerator compartment was switched off (e.g. during an

extended  absence  like  holidays),  it  can  be  switched  back  on

separately.

u

Open the door.

u

Press On/Off button, refrigerator compartment

 Fig. 2 (1)

.

w

The interior light is on when the door is opened.

w

The temperature display shines. Refrigerator and BioFresh

compartment are switched on.

The  child-proofing  function  enables  you  to  make

sure that the appliance is not inadvertently switched

off by playing children.

u

To  activate  the  setting  mode:  press  SuperFrost  button

Fig. 2 (12)

 for about 5 s.

w

c

 flashes on the display.

w

The menu symbol

 Fig. 2 (16)

 shines.

u

Briefly press the SuperFrost button

 Fig. 2 (12)

.to confirm.

When 

c1

 is indicated in the display:

u

Tto  activate  the  child  lock,  briefly  press  the

SuperFrost button

 Fig. 2 (12)

.

w The  child  lock  symbol

  Fig.  2  (17)

  shines. 

c

  flashes  in  the

display.
When 

c0

 is indicated in the display:

u

to  deactivate  the  child  lock,  briefly  press  the  SuperFrost

button

 Fig. 2 (12)

.

w The child lock symbol

 Fig. 2 (17)

 goes out. 

c

 flashes in the

display.

u

To deactivate the set-up mode: press On/Off button, freezer

compartment

 Fig. 2 (8)

.

u

Wait for 5 minutes.

w

The  temperature  is  indicated  again  in  the  temperature

display.

For  refrigerator/BioFresh  compartment  and  freezer  compart-

ment

If the door is open for longer than 60 seconds, the

audible warning will sound.
The  audible  alarm  is  automatically  silenced  when

the door is closed.

The audible alarm can be muted when the door is open. The

sound  switch-off  function  is  active  as  long  as  the  door  is  left

open.

u

Press alarm button

 Fig. 2 (14)

.

w

The door alarm is silenced.

The audible alarm sounds if the freezer temperature

is not cold enough.
The  temperature  display  and  the  alarm  symbol

Fig. 2 (15)

 flash at the same time.

The cause of the temperature being too high may be:

-

warm fresh food was placed inside

-

too much warm ambient air flowed in when rearranging and

removing food

-

power failure for some time

-

the appliance is faulty

The audible alarm is automatically silenced, the alarm symbol

Fig. 2 (15)

 goes out and the temperature display stops flashing

when the temperature is sufficiently cold again.
If the alarm status persists: (see Malfunction).

Food may be spoilt if the temperature is not cold enough.

u

Check the quality of the food. Do not consume spoiled food.

The  audible  alarm  can  be  muted.  When  the  temperature  is

sufficiently cold again, the alarm function is active again.

u

Press alarm button

 Fig. 2 (14)

.

w

The audible alarm is silenced.

The  natural  circulation  of  air  in  the  refrigerator  compartment

results  in  zones  differing  in  temperature.  It  is  coldest  directly

above  the  plate  separating  off  the  BioFresh  zone  and  at  the

rear wall. It is warmest at the top front of the compartment and

in the door.