Liebherr 131113 7085462 - 01 User Manual

With  the  top  drawer

removed:

u

to  remove  cold  storage

accumulators: take hold of

the  cold  storage  accumu-

lator at the side and press

it down for removal.

The IceMaker is in the top drawer of the freezer compartment.

The drawer is marked “IceMaker”.
Make certain that the following conditions are met:

-

The appliance is level.

-

The appliance is connected.

-

The freezer compartment is switched on.

-

The IceMaker is connected to the water supply.

Fig. 13 

u

Pull out the drawer.

u

Press  the  On/Off  button

  Fig.  13  (1)

  so  that  the  LED

Fig. 13 (2)

 shines.

u

Push in the drawer.

w

The IceMaker symbol

 Fig. 2 (18)

 shines.

u

The IceMaker produces ice cubes only if the drawer is fully

closed.

Producing ice cubes*
The production capacity depends on the freezer temperature.

The  lower  the  temperature,  the  more  ice  cubes  can  be

produced in a specific period.
The ice cubes drop from the IceMaker into the drawer. When a

certain filling level has been reached, no further ice cubes are

produced. The IceMaker does not fill the drawer right up to the

brim.
If  large  quantities  of  ice  cubes  are  needed,  the  complete

IceMaker  drawer  can  be  exchanged  for  the  adjacent  drawer.

When  the  drawer  is  closed,  the  IceMaker  automatically  re-

commences production.
Once  the  IceMaker  has  been  switched  on  for  the  first  time,  it

may take up to 24 hours until the first ice cubes are produced.

When the appliance is used for the first time and if it has been

out of use for a long time, particles may collect in the IceMaker

and/or water conduit.

u

Therefore do not use or consume the ice cubes made in the

first 24 hours.

Setting the water intake time*
The  opening  time  of  the  IceMaker  valve  can  be  set  if,  for

example, the water pressure in the pipe is too low or too high.
The water intake time can be set in stages from 

E1

 (short intake

time) to 

E8

 (long intake time). The intake is preset at 

E3

.

u

To  activate  the  setting  mode:  press  the  SuperFrost  button

Fig. 2 (12)

 for about 5 s.

w The display indicates 

c

.

w

Themenu symbol

 Fig. 2 (16)

 shines.

u

Using the Up setting button, freezer compartment

 Fig. 2 (10)

and  Down  setting  button,  freezer  compartment

  Fig.  2  (11)

select 

E

.

u

To confirm: briefly press the SuperFrost button

 Fig. 2 (12)

.

u

To  increase  the  water  intake  time:  press  the  Up

setting button, freezer compartment

 Fig. 2 (10)

.

u

To  reduce  the  water  intake  time:  press  the  Down

setting button, freezer compartment

 Fig. 2 (11)

.

u

To confirm: press the SuperFrost button

 Fig. 2 (12)

.

u

To  deactivate  the  setting  mode:  press  the  On/Off  button,

freezer compartment

 Fig. 2 (8)

.

w

The  temperature  is  indicated  again  in  the  temperature

display.

Switching off the IceMaker*
If no ice cubes are needed, the IceMaker can be switched off

independently of the freezer compartment.
When  the  IceMaker  is  switched  off,  the  IceMaker  drawer  can

also be used for freezing and storing food.

u

Press  the  On/Off  button  for  about  1  second  until  the  LED

goes out.

w

The IceMaker symbol

 Fig. 2 (18)

 goes out.

u

Clean the IceMaker.

w

This ensures that no water or ice remains in the IceMaker.

The NoFrost system automatically defrosts the appliance.
Refrigerator compartment:
The defrost water evaporates due to the compressor heat.

u

Regularly clean the drain opening to allow the water to flow

away (see 6.3) .

Freezer compartment:
The  moisture  condenses  on  the  evaporator,  is  periodically

defrosted and evaporates.

u

The appliance does not have to be manually defrosted.

The  refrigerator  compartment  is  defrosted  automatically.

The  defrost  water  evaporates  as  a  result  of  the  heat  of  the

compressor.  Drops  of  water  on  the  rear  wall  are  perfectly

normal.

u

Regularly clean the drain opening to allow the water to flow

A layer of frost or ice can build up in the freezer compartment

after a long period of operation.
The  layer  of  frost  or  ice  builds  up  faster  if  the  appliance  is

opened  often  or  if  the  food  is  warm  when  placed  inside.

However,  a  thick  layer  of  ice  will  increase  the  appliance‘s

energy  consumption.  You  should  therefore  defrost  the  appli-

ance regularly.

Risk of injury and damage as a result of hot steam!

u

Do not use electric heaters or steam cleaners, naked flames

or defrosting sprays for defrosting.

u

Do not remove ice using sharp instruments.

u

Switch on SuperFrost one day before defrosting.

w

The frozen goods are provided with a “cold reserve”.

u

Switch off the appliance.

w

The temperature display goes out.

w

If  the  temperature  display  does  not  go  out,  the  child  lock

function (see 5.1) is active.