Liebherr 211111 7085270 - 00 User Manual

u

Transfer  top  and  bottom

fastening  screws

  Fig.  2  (2)

to the opposite side.

Screws  are  self-tapping.  Use

cordless screwdriver:

u

Unscrew

  Fig.  5  (7)

  the

hinges  from  the  door,

transfer them diagonally and

screw them firmly into place

(with 4 Nm).

u

Close the vacated fastening

holes  with  the  accompa-

nying stoppers

 Fig. 5 (6)

.

Fig. 5 

Fig. 6 

u

Screw  the  ball  stud

 Fig. 6 (3)

  firmly  into  the  new  fastening

hole (with 4 Nm) (Torx® 25).

u

Push tension spring

 Fig. 6 (11)

 inwards again.

u

Screw  on  the  bracket

  Fig.  6  (1)

anschrauben.

u

Attachsoft stop mechanism

 Fig. 6 (2)

 to ball stud.

u

Attach  appliance  door  to  the  prefitted  fastening  screws

Fig. 2 (2)

.

u

Firmly tighten the fastening screws

 Fig. 2 (2)

(with 4 Nm).

u

Re-fit covers

 Fig. 2 (1)

.

Risk of injury due to the door dropping out!

If the fastening parts are not screwed into place firmly enough,

the door may drop out. This may lead to severe injuries. What

is  more,  the  door  may  not  close  and  therefore  the  appliance

may fail to cool properly.

u

Screw the hinges and the ball journal of the soft stop mecha-

nism firmly into place, with 4 Nm.

u

Screw  the  holder  of  the  soft  stop  mechanism  firmly  into

place, with at least 3 Nm.

u

Check all of the screws and retighten if necessary.

All the assembly components accompany the appliance.

Fig. 7 

Ensure that the following tools are to hand:

q

Cordless screwdriver Torx®15, 20, 25

q

Spanner 13

q

Screwdriver Torx® 15

q

Flat-blade screwdriver 6

q

Allen key 8

Risk of damage due to condensate!

u

If  refrigerator  and  freezer  are  installed  side-by-side,  the

freezer always has to be sited to the right of the refrigerator

(as  seen  from  the  front).  Condensate  is  prevented  from

forming between the appliances by the foamed-in side wall

heating on the left side of the freezer.

In the case of side-by-side installation, freezer and refrigerator

next  to  one  another,  build  the  appliances  into  separate  built-

under recesses.
Pay attention that the socket is readily accessible.
Check installation dimensions: