Zanussi SIP 3.0.2 User Manual

16

Plates
To clean solid plates, firstly wipe off any excess 
spillage and if necessary clean the plates with a light 
abrasive pad than dry the plates thoroughly.

• Drying may be facilitated by turning the plates onto 

the lowest setting for a short time until dry.

• Do not put any damp or wet items on the hotplates.
• Dry pots and pans with a cloth before placing them 

on the hotplates.

• Make sure the ceramic glass is cool before 

cleaning. It is important to clean the ceramic hob 
daily to prevent foodstuff being burnt on.

• Take care to avoid the hob trims when cleaning the 

ceramic glass as they may be damaged by the 
cleaning agents.

• Use a hob-cleaning product specifically designed 

for ceramic hobs daily. If foodstuff is not allowed to 
burn on it will be much easier to clean off.

• Apply a small amount of hob cleaner in the centre 

of each area to be cleaned.

• Dampen a clean paper towel or a plastic pad 

designed for non-stick saucepans and rub 
vigorously until all marks are removed. This may 
take a few minutes.

• Wipe off residues of cleaner with another damp 

paper towel and polish dry with a soft cloth.

• If hob cleaner is unavailable, one or more of the 

cleaning agents below may be used temporarily:

-  Cream Cleaner
-  Baking Soda

To remove more stubborn marks
• Cream cleaner may be used to clean off more 

stubborn stains or to remove discolouration.

• It may be necessary to rub the marks hard for 

several minutes.

• Use a plastic pad designed for non-stick saucepans 

with cream cleaner for removal of more stubborn 
stains.

• Cleaners that contain bleach should not be used as 

they may dull the surface finishes. Harsh abrasives 
and scourers should also be avoided. Multi-surface 
anti-bacterial cleaning products should not be used 
on the ceramic hob or on the surrounding trims.

Before cleaning always allow the appliance to cool 
down before switching off at the electricity supply.

• Do not use abrasive cleaning materials e.g. 

abrasive cream cleaners, wire wool pads or 
scourers on painted or printed finishes as damage 
may occur. Regularly wipe over the control panel, 
control knobs, handles, doors and appliance sides 
using a soft cloth and hot soapy water. To prevent 
streaking, finish with a soft cloth.

• Stainless Steel cream cleaners are abrasive and 

should be avoided as they may dull the surface 
finish. Any spillage on the stainless steel finish 
must be wiped off immediately.

Do not attempt to remove any of the control knobs 
from the appliance as this may cause damage and is 
a safety hazard.

Cleaning the solid hob (ZCE560DW)
Clean the hob after each use. To ensure the best 
results from your hob and to prolong its good looks 
regular cleaning and maintenance is essential. 
Cleaning and maintenance should only be carried out 
when the hob is cool.

Hob surface should be cleaned with a lukewarm 
solution of water and a mild detergent, periodically it 
may be necessary to use a mild scouring agent. 
Dust, fat and liquids from food that has boiled over 
must be removed as soon as possible. Never use a 
scouring pad on the hob surface and on no occasion 
use a sharp object.
Scratched or clipped surface cannot be repaired. In 
additional to the unsightly appearance this may lead 
to grooves appearing and eventually the enamel to 
crack.

!

!