Whirlpool 195428 User Manual

Page of 40
5
CYCLE GUIDE — STANDARD CYCLES
Items to wash  
using default  
cycle settings:
Cycle:
Temp*:
Available 
Options:
Cycle Details:
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle. 
Small load: Fill the washer drum with 3-5 items, not more than 1/4 full. 
Medium load: Fill the washer drum up to about 1/2 full. 
Large load: Fill the washer drum up to about 3/4 full. 
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely. 
For best results, avoid packing tightly.
* All temperature selections feature a cold rinse. 
Settings and options shown in 
bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the  
load being washed.  
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Heavy Duty
Normal
Delicate
Cycle Signal
Cycle Signal
Cycle Signal
Hot 
Warm 
Cold
Hot 
Warm 
Cold
Warm 
Cold
Sturdy colorfast fabrics and 
heavily soiled garments, towels, 
and jeans
Normally soiled cottons, linens, 
sheets, and mixed garment 
loads
Sheer fabrics, lingerie,  
sweaters, and special care 
items marked “Hand Washable”
This cycle combines fast-speed tumbling, 
longer wash time, and extra high-speed spin to 
shorten drying times. It is designed for medium 
and large loads.
This cycle combines medium-speed tumbling 
and extra high-speed spin, and a load cooling 
process to reduce wrinkling. 
This cycle combines low-speed tumbling and 
low-speed spin for gentle fabric.
NOTE: A single item, bulky items, or tightly packing may cause imbalance. Add items or try to evenly distribute wet laundry in the 
drum, and start a Rinse & Spin and Drain & Spin cycle. If the laundry is still wet, take half of the load out of the washer and try again.
CYCLE GUIDE — SPECIAL-PURPOSE CYCLES
* All temperature selections feature a cold rinse. 
Drain & Spin
CLEAN 
WASHER with 
Affresh
Swimwear, items that need 
rinsing only.
Cold
Cycle Signal
This cycle adds water followed by a high speed 
tumbling. For some fabrics you may wish to set 
the spin speed to a lower setting.
Cycle Signal
Cycle Signal
N/A
N/A
Wet load of clothes.
No clothes in washer.
Use this cycle to get water extracted from 
clothes or you want additional extraction on 
a washed load. Using Drain & Spin. Use this 
cycle with medium and large loads.
Use this cycle every 30 washes to keep the  
inside of your washer fresh and clean. This 
cycle uses a higher water level. Use with 
AFFRESH
®
 washer cleaner tablet or liquid 
chlorine bleach to thoroughly clean the inside 
of your washer. This cycle should not be  
interrupted. See “Cleaning Your Washer.”
IMPORTANT: Do not place garments or 
other items in the washer during the 
CLEAN 
WASHER with Affresh
 cycle. Use this cycle 
with an empty wash tub.
Rinse & Spin
Items to wash  
using default  
cycle settings:
Cycle:
Temp*:
Available 
Options:
Cycle Details: