Liebherr EWTNes 2956 User Manual

WF1051 / EWTNes 2956

14

I

NSTALLATION

Turn clockwise for up and counterclock-wise 
for down.  For the rear use the adjusting 
bolt (2).  Turn clockwise for down and counter-
clockwise for up.
Maximum adjustment: 19/64" (15 mm).

3.   Figure 18: Align the appliance at the side 

with the cabinet side panel and attach it with 
screws (1).

-   Cover the screws with cover caps (2).

4.   Fit the ventilation grille at the bottom [(3) if 

the door is hinged on the left, (4) if it is on the 
right]: Secure the ventilation grille so that it 
touches the floor and then adjust it using the 
slots.

1.   Carefully slide the appliance into the cabinet 

until the ventilation grille touches the surrounding 
kitchen cabinet.

2.   Align the appliance until it is parallel with the sur-

rounding kitchen cabinet.  Use the open- end 
wrench 10 mm (3) to adjust the feet at the front.  

  - Figure 17: Connect the appliance to the 

main power supply.

  -  If the appliance is equipped with an 

IceMaker, establish the connection for 
the water supply. See “IceMaker, Water 
Connection”.