GE GFK0579B User Manual
D
Series 90–70 Remote I/O Scanner User’s Manual – July 1992
144
Step 2: Configure the Remote I/O Scanner
Display the configuration screen for Rack 0, which is where the Remote I/O Scanner is
installed.
installed.
The Remote I/O Scanner is installed in slot 1 of the rack; however, as the configuration
screen shows, this is the slot normally assigned to a CPU. The CPU module must be
replaced in order to create a remote drop folder.
screen shows, this is the slot normally assigned to a CPU. The CPU module must be
replaced in order to create a remote drop folder.
In the Rack 0 display, zoom (F10) into the CPU slot, and press the F2 (Remote) key. A
module description screen appears.
module description screen appears.
The screen prompts:
REPLACE displayed module? (Y/N)
Press Y to enter the Remote I/O Scanner in the CPU slot. You are on your way to
creating a remote drop folder.
creating a remote drop folder.
Th I/O Map configuration screen appears. It should be filled in exactly as the
equivalent screen was filled in during Series 90–70 PLC configuration (as instructed in
appendix C).
equivalent screen was filled in during Series 90–70 PLC configuration (as instructed in
appendix C).
Bus Adr
29