GE GFK0579B User Manual

The following equipment is required to use a Remote I/O Scanner.

H At least one Series 90–70 5–slot or 9–slot remote rack with Power Supply.  A

remote drop may include multiple racks and power supplies.

H If a Genius Hand–held Monitor will be used to configure or monitor a remote

drop, it must be version 4.0 (IC660HHM501G) or later.

H If Logicmaster 90–70 configuration software will be used to configure the remote

drop, it must be release 3.0 or later:

A. IC641SWP701F (3.5”, 2DD, 5.25” 2S/HD)

B. IC641SWP704C (5.25” 2S/2D)

H If the parallel version of Logicmaster 90–70 will be used with a remote drop, the

remote drop must include a Bus Transmitter Module (IC697BEM713) for
connection to the programmer.

H If the remote drop will include more than one rack of modules, a Bus Transmitter

Module (IC697BEM713) one or more Bus Receiver Modules (IC697BEM711), and
appropriate cables are required.

H

h The Series 90–70 CPU firmware must be release 2.0 or later.
h The Logicmastert 90–70 programming and configuration software must be

release 3.0 or later.  Catalog numbers are given above.

h A Series 90–70 Genius Bus Controller, release 3.0 or later. The Bus Controller

must be 4.0 or later for full diagnostics display from Logicmaster 90–70 (see
chapter 8), or for redundancy applications.

H

t PLC 

h CPU: rev. 105 or later.
h Logicmaster 6 Programming Software: release 4.02 or later.
h Bus Controllers: IC660CBB902 or 903, version 1.7 or later.

H

t PLC 

h CPU: rev. 3.2 (catalog number with E suffix) or later.
h Logicmaster 5 Programming Software: release 2.01 or later.
h Bus Controller: any version

H

h PCIM: any version
h QBIM: any version