Intel AR-B1890 User Manual

 

41

This menu contains the most appropriate values of the system parameters that 

allow minimum system performance. 

 

This menu allows you to load the factory defaults for BIOS and Chipset 

features which the system automatically detects. 

 

When you select this function, the following message will appear at the center 

of the screen to assist you creating a password. 

Type the password, up to eight characters and press <Enter>. You will be 

asked to confirm the password. Type the password again and press <Enter>. 

You may also press <Esc> to abort the selection and not enter a password. 

To disable a password , just press <Enter> when you are prompt to enter the 

password. A message “PASSWORD DISABLED” will appear to confirm the 

password being disabled. Once the password is disabled, the system will boot 

and you can enter Setup freely. 

 

This menu allows you to determine whether to accept modifications or not. If 

you type “Y”, you will quit the Setup Utility and save all you setup value to the 

CMOS. If you type “N”, you will return to Setup Utility. 

 

This menu allows you to exit the Setup Utility without saving the changes. If 

you type “Y”, you will quit the Setup Utility without saving to CMOS. If you type 

“N”, you will return to Setup Utility.