IBM 1220 User Manual
62
3
Gently pull the three posts on the hard disk mounting plate out of the holes on the system
board.
board.
4
Gently pull the ribbon cable connector out of the connector on the system board.
5
Place the disk in its original packaging, or wrap the disk in paper and store it in a box.
6
Replace the system board access cover. See
Removing a firmware card
Complete the following steps to remove a firmware card. If an option card has been installed, you must
remove it before removing the firmware card. See
remove it before removing the firmware card. See
W
ARNING
:
Optional firmware cards are easily damaged by static electricity. Touch something
metal on the printer before you touch an optional firmware card.
metal on the printer before you touch an optional firmware card.
1
Remove the system board access cover. See
.
2
Grasp the firmware card gently and pull it straight out in one motion. Do not pull one side and
then the other.
then the other.
3
Place the card in its original packaging, or wrap the card in paper and store it in a box.
4
Replace the system board access cover. See