Lexmark MS312dn Laser Printer User Manual
Use
To
Activate
Yes
No
No
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
View Name
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
View Address
Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Set Zone
[list of zones available on the network]
Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
SMTP Setup menu
Use
To
Primary SMTP Gateway
Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Specify the amount of time in seconds before the server stops trying to
send an e
send an e
‑mail.
Note: 30 seconds is the factory default setting.
Reply Address
Specify a reply address of up to 128 characters in the e-mail sent by the
printer.
printer.
Use SSL
Disabled
Negotiate
Required
Negotiate
Required
Set the printer to use SSL for increased security when connecting to the
SMTP server.
SMTP server.
Notes:
•
Disabled is the factory default setting.
•
When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
SSL will be used.
SMTP Server Authentication
No authentication required
Login/Plain
CRAM
Login/Plain
CRAM
‑MD5
Digest
‑MD5
NTLM
Kerberos 5
Kerberos 5
Specify the type of user authentication required for printing privileges.
Note: “No authentication required” is the factory default setting.
Understanding the printer menus
101