Epson 2190 User Manual
EPSON FX-890/FX-2190
4 - EPSON FX-890/FX-2190
6/03
Environmental
Paper
Use recycled paper, multipart paper, labels, envelopes, and roll
paper only under normal temperature and humidity conditions,
as follows:
paper only under normal temperature and humidity conditions,
as follows:
Temperature
59 to 77 °F (15 to 25 °C)
Humidity
30 to 60% RH
Do not load paper that has been folded or is damaged,
wrinkled, or curled.
wrinkled, or curled.
Single sheets, front or rear entry
*
7.2 to 8.5 inches (182 to 216 mm) using the optional cut-sheet
feeder for FX-890.
7.2 to 16.5 inches (182 to 420 mm) using the optional cut-sheet
feeder for FX-2190.
feeder for FX-890.
7.2 to 16.5 inches (182 to 420 mm) using the optional cut-sheet
feeder for FX-2190.
** 8.3 to 14.3 inches (210 to 364 mm) using the optional cut-sheet
feeder.
***0.0028 to 0.0055 inch (0.07 to 0.14 mm) using the optional
cut-sheet feeder.
Single-sheet multipart forms (for the optional front
sheet or front paper guide only):
sheet or front paper guide only):
Continuous paper (ordinary and multipart):
Do not load thick paper, such as multipart forms with five or six
parts, in the rear slot.
parts, in the rear slot.
The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1.
between 3:1 and 5:1.
The thickness of the perforation part when extended should be
1 mm or less.
1 mm or less.
The perforation between pages should not extend all the way to
the edges of the paper. Uncut length on the edges should be
1 mm or more.
the edges of the paper. Uncut length on the edges should be
1 mm or more.
The horizontal and vertical perforation cuts should not cross.
Temperature
Humidity (without
condensation)
condensation)
Operation (plain
paper)
paper)
41 to 95 °F (5 to 35 °C)
10 to 80% RH
Operation
(recycled paper,
envelopes, labels
or roll paper)
(recycled paper,
envelopes, labels
or roll paper)
59 to 77 °F (15 to 25 °C)
30 to 60% RH
Storage
–22 to 140 °F (–30 to 60 °C)
0 to 85% RH
Minimum
Maximum
Width
*
(inch)
(mm)
(mm)
3.9
100
100
FX-890:
10.1
257
10.1
257
FX-2190:
16.5
420
16.5
420
Length
**
(inch)
(mm)
(mm)
3.9
100
100
14.3
364
364
Thickness
***
(inch)
(mm)
(mm)
0.0025
0.065
0.065
0.0055
0.14
0.14
Weight
(lb)
(g/m²)
(lb)
(g/m²)
14
52
52
24
90
90
Quality
Plain paper and recycled paper
Minimum
Maximum
Width
(inch)
(mm)
(inch)
(mm)
3.9
100
100
FX-890:
10.1
257
10.1
257
FX-2190:
16.5
420
16.5
420
Length
((inch)
(mm)
((inch)
(mm)
3.9
100
100
14.3
364
364
16.5
420
420
Copies
1 original + 5 copies
Total thickness
(inch)
(mm)
(inch)
(mm)
0.0047
0.12
0.12
0.018
0.46
0.46
Weight per sheet of
multipart
(lb)
(g/m²)
multipart
(lb)
(g/m²)
12
40
40
15
58
58
Quality
Carbonless multipart forms with a line of glue at
the top or one side of the form
the top or one side of the form
Minimum
Maximum
Width
(inch)
(mm)
(inch)
(mm)
4.0
101.6
101.6
FX-890:
10.0
254.0
10.0
254.0
FX-2190:
16.0
406.4
16.0
406.4
Length, one page
(inch)
(mm)
(inch)
(mm)
4.0
101.6
101.6
22.0
558.8
558.8
Copies
1 original + 5 copies
Total thickness
(inch)
(mm)
(inch)
(mm)
0.0025
0.065
0.065
0.018
0.46
0.46
Weight, ordinary
paper
(lb)
(g/m²)
paper
(lb)
(g/m²)
14
52
52
22
82
82
Weight per sheet of
multipart
(lb)
(g/m²)
multipart
(lb)
(g/m²)
12
40
40
15
58
58
Quality
Plain paper, recycled paper, and carbonless
multipart forms with point gluing or paper
stapling on both sides
multipart forms with point gluing or paper
stapling on both sides