Siemens 2000592-001 User Manual
ANCB Installation,
Continued
Instructions,
continued
continued
Step
Procedure
4.
Press the ANCB straight into slot 1. Make sure that you push
evenly on both edges of the board until the ANCB is firmly
seated
evenly on both edges of the board until the ANCB is firmly
seated
5.
Secure the board to the cage with the screw you removed in
step 1.
step 1.
6.
Connect Ethernet crossover cable from 10BaseT connector
on SYSCON to 10BaseT connector on ANCB.
on SYSCON to 10BaseT connector on ANCB.
ETHERNET
CROSSOVER
CABLE
CROSSOVER
CABLE
7.
Make a selection from the following Table.
To make…….
THEN goto……..
DataNET
Copper
Connections
Fiber Optic Connections
6
• Installation
2000592-001