Schneider Electric 66074 User Manual
Mupgrade Utility
For Network Management Cards
User Manual
Mupgrade - User Manual
34003662EN/CA
Page 12/18
8 Remote Configuration
The Remote configuration function allows you to import, modify and export configuration (settings)
from and to Network Management Cards.
Four steps to configure all your Network Management Cards:
1. Configure a Network Management Card located on the network through the html interface to
from and to Network Management Cards.
Four steps to configure all your Network Management Cards:
1. Configure a Network Management Card located on the network through the html interface to
create a master configuration. Refer to the Network Management Card user manual for details.
2. Import this configuration from the master card.
3. Edit and change some parameters and select the fields whose must be overwritten in the
destination cards and save the new configuration in a file.
4. Export the new configuration to other cards which have
same firmware release
than the master
card
This feature is available starting card firmware release FB:
There is no compatibility limitation depending on the UPS model used or on the Network Management
Card model. A configuration file is compatible with all the other cards which have the same firmware
revision.