Samsung SLPD220 User Manual
Rev. 1.01
- 11 -
SLP-D22**
3-2 Interface Cable Connection
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
-
RS-232C
(Serial)
-
USB
-
Ethernet
(exclusively
for SLP-D220E, D223E)
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port.
- For a Serial cable, secure by tightening the screws on both sides.
- Connect USB cable when using USB interface.
- Connect LAN cable when using Ethernet interface.
- Connect USB cable when using USB interface.
- Connect LAN cable when using Ethernet interface.
USB CABLE OR LAN
(ETHERNET) CABLE
(ETHERNET) CABLE
RS-232 (Serial) Cable