Siemens C79000-G8976-C156-07 User Manual
2
Getting Started “Configured Mode”
26
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000-G8976-C156-07
2
Getting Started “Configured Mode”
The “configured mode” should be selected for productive communication between
applications in the PC station and the programmable controllers, for example
SIMATIC S7-400.
applications in the PC station and the programmable controllers, for example
SIMATIC S7-400.
This chapter explains how to commission your PC station with communication
modules for this mode for the first time (initial configuration).
modules for this mode for the first time (initial configuration).
In conjunction with the project engineering, we will explain how to handle the data
exchange between the PC station and the project engineering tool.
exchange between the PC station and the project engineering tool.
Requirement: SIMATIC NET PC software and hardware are installed
Before you work through the steps described here, you must first install the
SIMATIC NET software and the hardware on your PC station.
SIMATIC NET software and the hardware on your PC station.
S
Installing SIMATIC NET PC Software
Follow the procedure described in the Installation Instructions that accompany
every SIMATIC NET PC module to install the products of the SIMATIC NET PC
Software CD.
every SIMATIC NET PC module to install the products of the SIMATIC NET PC
Software CD.
The installed products are described in detail in the “Tools” section.
S
Installing hardware (PC modules)
Install the hardware in your computer as described in the Installation
Instructions that accompany every module.
Instructions that accompany every module.