Intel 1520 User Manual

Chapter 5 Using the Command-Line Interface

Select passwd, and press Enter. Doing so causes a prompt to appear 
requesting you to type and confirm the new administrator password.

Enter and confirm the new password.

Press CTRL-X to save your changes and return to the previous screen.

Changing the password value using CLI changes only the password for telnet or 
serial access. It does not change the password for Manager UI access. 

Resetting to factory settings

You can reset settings in the appliance to their factory defaults.

Using this command deletes your installation and requires you to reinstall and 
reconfigure the appliance completely.

▼ Resetting the appliance to default factory settings

Select the main menu, and press Enter. 

Select reset, and press Enter. Doing so displays a confirmation prompt asking 
you whether you want to really reset settings.

Be sure that 

y

 appear after the confirmation prompt and then press Enter. 

Press CTRL-X to reset the settings and return to the previous screen. 
Choosing to reset the settings causes the appliance to stop and delete the 
installation, then returns you to the setup menu so you can reinstall the 
appliance again. See Using the setup menu‚ on page 52 for more information.

Preparing a cache disk

You can prepare a cache disk for use in the system. You must prepare a new drive 
in the system before the caching software can use it. Preparing the drive allows 
the caching software to recognize the drive as a cache disk.

▼ Preparing a cache disk

Select the main menu, and press Enter. 

Select prep, and press Enter. Doing so causes the system to examine the 
cache drives for uninitialized drives and prepare them for use.

The config menu lets you do the following:

✔ Set general controls, such as shut down, bounce, start up, or restart the local 

appliance, and restart or bounce the cluster. 

✔ Configure protocol options.

✔ Configure the cache. 

✔ Configure security options.