Intel 1520 User Manual

Intel NetStructure Cache Appliance Administrator’s Guide

The Manager UI is a browser-based interface, consisting of a series of web pages. 
Use the Manager UI to monitor performance and configure and fine-tune selected 
nodes in your cluster. You can access any node in the cluster through the same 
Manager UI. 

▼ Accessing the Manager UI

Open your web browser.

The Manager UI requires Java and JavaScript; be sure to enable Java and 
JavaScript.

Point your browser at this location, where 

 is the IP address you 

have assigned to the appliance or the qualified DNS name. If the appliance is 
part of a cluster, you will be logging into that specific node:

Provide your appliance administrator’s ID and password. By default, the 
administrator ID is 

admin

 and the password is 

admin

. It is recommended 

that you change the default administrator ID and password. You can change 
these values by using the Security page. For information on how to use the 
Security page, see Using the Security page‚ on page 39.

Should you forget your password, contact Customer Service at Intel 
Corporation for assistance. For information on how to contact Intel Customer 
Service, see the Intel

NetStructure Cache Appliance Product Support booklet 

that came with your system.

Changing ID and password values by using the Manager UI changes those 
values for the node you are logging into only. Furthermore, changing the ID 
and password for the Manager UI does not change the ID and password for 
telnet access. You must use the command-line interface (CLI) to change the 
telnet ID and password for the node.

The Manager UI appears in your browser in the default monitor mode. The 
Dashboard page, as shown Figure 1, is the default page. From the 
MONITOR and CONFIGURE tabs to the left of the Dashboard page, you 
can reach all other Manager UI pages.

http://nodename:8081/