Toshiba 2455 User Manual
66
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.4.1
To secure the keyboard, fit the tabs at the bottom of the
keyboard into the corresponding slots at the top of the
computer’s palm rest.
keyboard into the corresponding slots at the top of the
computer’s palm rest.
11
Fasten the keyboard with the keyboard retaining brace
and screws.
and screws.
12
Replace the panel above the keyboard by doing the
following:
following:
❖
Fit the tabs at the bottom of the panel into
corresponding slots at the top of the keyboard.
corresponding slots at the top of the keyboard.
❖
Fit the tabs at the top of the panel into corresponding
slots at the base of the display and gently push down.
slots at the base of the display and gently push down.
When the panel is properly positioned, it will snap down
into place.
into place.
13
Reconnect any cables you removed.
14
Turn on the computer.
To verify that the computer correctly recognizes the
memory, see
memory, see
.
15
If the computer does not recognize the memory, shut
down the computer, remove the keyboard and make sure
the memory module is seated properly, as described in
step 8, above.
down the computer, remove the keyboard and make sure
the memory module is seated properly, as described in
step 8, above.
Removing a memory module
CAUTION: If you use the computer for a long time, the memory
modules will become hot. If this happens, let the modules cool to
room temperature before you replace them.
modules will become hot. If this happens, let the modules cool to
room temperature before you replace them.