Siemens CFMC1315-LP User Manual

29

 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

01.2009

 
 

 

 

 

Basic items such as size and quality of delivered images of the camera can be set. 

Select "Image Parameters" in the Configuration menu. 

Î

 

A sub menu for Camera Settings will appear. 

Click "Basic" in the sub menu. 

Î

 

The "Camera - Basic Settings" screen will appear. 

Configure the individual settings. 

Click the Save button to save your settings. 

The settings will not be reflected unless the Save button is clicked. 

 

Preset image 

Four types of specific application conditions such as Indoor, outdoor, 
tunnel and casino can be selected for quick and easy setup purpose. 

EV Adjustment 

19 steps of offset level from -9 to +9 are available to adjust the internal 
reference brightness level. Images become brighter as higher the level 
is and becomes darker as lower the level is. 

Auto Gain Control 

The circuit gain is adjusted automatically between Min. and the 
selected value, "Low," "Mid" and "High” where the sensitivity 
characteristic increases in the order of "Low," "Mid" and "High”. Noise 
at dark will be more noticeable when Auto Gain Control is near "High". 

NOTE: 
If sensitivity is still too low after setting Auto Gain control, set the high 
limit value of the slow shutter, to further increase sensitivity. 

Shutter Speed 

Default is: 1/25s. The shutter speed is set at automatic, 1/25 s, 1/50 s, 
1/120 s, 1/250 s, 1/1000 s and 1/10000 s. The network camera will 
adjust the aperture according to the amount of ambient light.