GE CC-SCSTAT User Manual

The Installer settings screen is a hidden screen designed for installer use only. Do not change any settings in 
this screen unless you are a qualified service technician. Changing these settings will affect the operation of the 
heating/cooling system.

To enter this screen, go to the 

 on page 7 and press and hold the two inner control buttons for 

three seconds until the Installer settings screen (Figure 13) appears.

The Installer settings screen displays the current internal settings of the thermostat. You can view and change 
the settings from this screen. Scroll to the desired function and press Plus (+) or Minus (-) to change the value.

Screen navigation buttons include:

Done.  Return to the 

 on page 7.

Plus.  Increase value by 1 or change from N to Y.

Minus.  Decrease value by 1 or change from Y to N.

Select.  Select menu item to go to a submenu.

Up.  Move selection pointer up.

Down.  Move selection pointer down.

Done

   +

   -

Select

Display Lock                      N

Service Mode

Network Settings                    

MaxHeat SP                     109