GE 00023598 User Manual

Telephone Set Up

You can customize the following settings to suit your needs.
Local Area Code Sets your local area code for Dial Back.
Display Contrast Selects the display contrast.
Time/Date

Sets the time and date.

Message Length Sets the length of time allowed for

incoming messages.

Recording

Sets the recording quality between

Quality

standard (STD) and long play (LONG).

Rings to Answer Selects the number of rings before

the unit answers.

Remote Access

Sets your 3-digit code used for remote access to the unit.

TONE/PULSE

Sets the phone for tone or pulse dialing.

Dialing

Setting Your Local Area Code

1. Press and release the

MENU button. The screen displays LOCAL AREA CODE. The

unit announces, “

Setup menu. Use SKIP or REPEAT to change setting, press MENU

to save setting.”

2. The left-most digit, or a (_) sign flashes indicating the unit is ready to accept the

area code entry.

3. Use the keypad to enter your three digit

Local Area Code.

4. After the 3rd and last digit are entered, press the

MENU button to store the area

code and go to the next setting.

NOTE: If you make a mistake, you can use the SKIP or REPEAT

button to move between 1st to rd digit and input the number from

the keypad again.
NOTE: To skip to the next setting, press the MENU button. To exit setup,

press the FLASH/EXIT button.

Default Settings

Local Area Code

– – –

Display Contrast

Time/Date

12 a.m. 1/01

Message Length

2 minutes

Recording Quality

Standard (STD)

Rings to Answer

Security Code

Dialing

Tone