Furuno FS-1575 FS-2575 FS-5075 User Manual

6.  MENU OPERATION

4. Rotate the ENTER knob to select [ENABLE] or [DISABLE] then push the knob. 

For [ENABLE], "FAX" is added to the class of emission selection menu.

Select the antenna to use for TX and RX, common or separate.

1. Rotate the ENTER knob to select [SYSTEM] on the [MENU] screen then push the 

knob.

2. Rotate the ENTER knob to select [RX SETUP] then push the knob.
3. Rotate the ENTER knob to select [ANT SELECT] then push the knob.
4. Rotate the ENTER knob to select [TRX ANT] or [RX ANT] then push the knob.

Note 1: You can not select [RX ANT] without R_ANT. Contact your dealer.
Note 2: When sharing the WR antenna with R_ANT, select [RX ANT] so that you 
can always watch the frequency during transmission.

You can fine-tune the receiving frequency with the clarifier.

1. Rotate the ENTER knob to select [SYSTEM] on the [MENU] screen then push the 

knob.

2. Rotate the ENTER knob to select [RX SETUP] then push the knob.
3. Rotate the ENTER knob to select [CLARIFIER] then push the knob.
4. Rotate the ENTER knob to select [ON] or [OFF] then push the knob.

For [ON], the indication for clarifier setting appears on the RT screen as shown 
below.

Class of 
emission

Indication for 
clarifier setting